Aug-2024 Free 350-801 Test Questions Real Practice Test Questions
350-801 Dumps Updated Aug 13, 2024 WIith 390 Questions
Cisco 350-801 exam is designed for IT professionals who want to validate their skills in implementing and operating Cisco Collaboration Core Technologies. 350-801 exam tests the candidates' knowledge of the latest Cisco technologies and solutions related to collaboration, including voice and video infrastructure, call control, messaging, and collaboration endpoints. 350-801 exam is designed to measure the candidates' ability to design, configure, and troubleshoot Cisco collaboration solutions.
To prepare for the Cisco 350-801 certification exam, candidates must have a strong understanding of collaboration technologies, including voice and video technologies, network infrastructure, and call control. Candidates can also enroll in Cisco-approved training courses to enhance their knowledge and skills in collaboration technologies. These courses can help candidates learn about the latest trends and best practices in collaboration technologies, and prepare them for the certification exam.
Cisco 350-801 exam is designed for professionals who want to validate their skills and knowledge in implementing and operating Cisco Collaboration Core Technologies. 350-801 exam is one of the requirements for earning the Cisco Certified Specialist - Collaboration Core certification. 350-801 exam covers a range of topics related to Cisco Collaboration Core Technologies, including Cisco Unified Communications Manager (CUCM), Cisco Unity Connection, Cisco Unified IM and Presence, and Cisco Expressway.
NEW QUESTION # 53
An administrator is developing an 8-class QoS baseline model. The CS3 standards-based marking recommendation is used for which type of class?
- A. Scavenger
- B. best effort
- C. call signaling
- D. voice
Answer: C
NEW QUESTION # 54
Due to service provider restriction, Cisco Unified Communications Manager cannot send video in the SDP. Which two options on Cisco Unified CM are configured to suppress video in the SDP is outgoing invites? (Choose two.)
- A. Change the Video Capabilities dropdown on the endpoint to Disabled.
- B. Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.
- C. Check the Retry Call as Audio on the SIP trunk
- D. Set Video bandwidth in the Region settings to 0.
- E. Add the audio forced command to voice service voip on the Unified Border Elements.
Answer: A,D
NEW QUESTION # 55
Refer to the exhibit. What is a possible cause of the PRI issue?
- A. The controller shut down.
- B. The framing is configured incorrectly.
- C. The clock source is incorrect.
- D. The cable is unplugged.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/wan/t1-e1-t3-e3/8131-T1-pri.html
NEW QUESTION # 56
Refer to the exhibit. The SDP offer/answer has been completed successfully but there is no DTMF when users press keys. What is the cause of the issue?
- A. DTMF was not negotiated on the call.
- B. DTMF was negotiated property in these messages.
- C. Payload type 110 was negotiated rather than type 101.
- D. G.729 rather than G.711ulaw was negotiated.
Answer: A
NEW QUESTION # 57
Which description of the Mobile and Remote Access feature is true?
- A. Collaboration Edge feature that enables remote individuals to access enterprise collaboration services via Jabber without the use of a VPN connection.
- B. Collaboration Edge feature that enables remote individuals to access enterprise collaboration services via Jabber with the use of a VPN connection.
- C. Collaboration Edge feature that enables remote individuals to access all enterprise collaboration services using a PC within the corporate environment.
- D. Collaboration Edge feature that enables remote individuals to perform international calls from Jabber with a VPN connection.
Answer: A
NEW QUESTION # 58
Which IP precedence value maps to DSCP EF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 59
Which two protocols can be configured for the Cisco Unity Connection and Cisco UCM integration? (Choose two.)
- A. SCCP
- B. H. 323
- C. SIP
- D. MGCP
- E. RTP
Answer: A,C
Explanation:
The two protocols that can be configured for the Cisco Unity Connection and Cisco UCM integration are SIP and SCCP.
SIP, or Session Initiation Protocol, is a signaling protocol used for initiating, maintaining, and terminating real-time sessions, including voice, video, and messaging applications.
SCCP, or Skinny Client Control Protocol, is a Cisco proprietary signaling protocol used for controlling Cisco IP phones.
H. 323 is an older signaling protocol that is no longer widely used. MGCP, or Media Gateway Control Protocol, is a protocol used for controlling media gateways. RTP, or Real-time Transport Protocol, is a protocol used for transporting real-time data, such as voice and video
NEW QUESTION # 60
An engineer must configure an MGCP gateway and register it to Cisco Unified Communications Manager. Which prerequisite must be met before applying the gateway commands to enable MGCP?
- A. Cisco Unified CM and the MGCP gateway must utilize the SIP OPTIONS ping feature to monitor status.
- B. The MGCP gateway and the Cisco Unified CM must be able to communicate over 2427,2428, and 2727.
- C. The MGCP gateway must have voice service VoIP configured.
- D. The MGCP gateway and the Cisco Unified CM must be able to communicate over ports 5060 and 5061.
Answer: B
NEW QUESTION # 61
When a call Is delivered to a gateway, the calling and called party number must be adapted to the PSTN service requirements of the trunk group. If a call is destined locally, the + sign and the explicit country code must be replaced with a national prefix. For the same city or region, the local area code must be replaced by a local prefix as applicable. Assuming that a Cisco UCM has a SIP trunk to a New York gateway (area code 917). which two combinations of solutions localize the calling and called party for a New York phone user? (Choose two.)
- A.
- B.
- C.
- D.
- E.
Answer: C,D
NEW QUESTION # 62
Which protocol does prime collaboration Assurance use to poll the health status of different systems in the collaboration environment?
- A. SMTP
- B. SIP
- C. SCCP
- D. SNMP
Answer: D
NEW QUESTION # 63
A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as
011841234567?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: D
NEW QUESTION # 64
Refer to the exhibit.
What is a possible cause of the PRI issue?
- A. The controller shut down.
- B. The framing is configured incorrectly.
- C. The clock source is incorrect.
- D. The cable is unplugged.
Answer: B
NEW QUESTION # 65
Which Cisco Unified communications manager configuration is required for SIP MWI integration?
- A. Enable "Accept unsolicited notification" on the SIP Trunk security profile.
- B. Select "Redirecting Diversion Header Delivery - outbound" on
the SIP trunk. - C. Enable "Accept presence subscription" on the SIP trunk security profile.
- D. Select "Redirecting Diversion Header Delivery - Inbound" on
the SIP trunk.
Answer: A
NEW QUESTION # 66
An engineer with troubleshoots poor voice quality on multiple calls. After looking at packet captures, the engineer notices high levels of jitter. Which two areas does the engineer check to prevent jitter? (Choose two.)
- A. All devices use wired connections instead of wireless connections.
- B. Voice packets are classified and marked.
- C. MTP is enable on the sip trunk to cisco Unified Border Element.
- D. Cisco UBE manages voice traffic, not data traffic.
- E. The network meets bandwidth requirements.
Answer: B,E
NEW QUESTION # 67
Which configuration tells a switch port to send Cisco Discovery protocol packets that configure an attached Cisco IP phone to trust tagged traffic that is received from a device that is connected to the access port on the Cisco IP phone?
Router# configure terminal
- A. Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos trust extend cos 5
Router# configure terminal - B. Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos trust extend
Router# configure terminal - C. Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos trust extend cos 3
Router# configure terminal - D. Router(config)# interface gigabitethernet 5/1
Router(config-if)# platform qos extend trust
Answer: B
NEW QUESTION # 68
An engineer is designing a load balancing solution for two Cisco Unified Border routers. The first router (cube1.abc.com) takes 60% of the calls and the second router (cute2.abc.com) takes 40% of the calls, Assume all DNS A records have been created. Which two SRV records are needed for a load balanced solution? (Choose two.)
- A. sip_udp.abc.com 60 IN SRV 1 60 5060 cube1.abc.com
- B. sip_udp.abc.com 60 IN SRV 60 1 5060 cube1.abc.com
- C. sip_udp.abc.com 60 IN SRV 1 40 5060 cube2.abc.com
- D. sip_udp.abc.com 60 IN SRV 2 60 5060 cube1.abc.com
- E. sip_udp.abc.com 60 IN SRV 3 60 5060 cube2.abc.com
Answer: A,C
NEW QUESTION # 69
AN engineer is implementing toll fraud prevention for incoming calls cluster-wide on cisco UCM. What is the first step to configure this feature?
- A. Set service parameter "System Remote Access Blocked Numbers' to True
- B. Configure blocking for inbound calls based on caller ID.
- C. Set service parameter 'Block OffNet to OffNet Transfer' to False
- D. Set service parameter 'Block OffNet To OffNet Transfer' to True
Answer: C
NEW QUESTION # 70
What is the function of the Cisco Unity Connection Call Handler?
- A. routes calls to a user based on caller input
- B. allows customized scripts for IVR capabilities
- C. queues calls
- D. searches a list of extensions until the call is answered
Answer: A
NEW QUESTION # 71
Refer to the exhibit.
What causes the PRI issue?
- A. The controller shut down
- B. The clock source is incorrect.
- C. The framing is configured incorrectly
- D. The cable is unplugged
Answer: D
Explanation:
The show controller t1 command shows that the T1 interface is up but the line protocol is down. This indicates that the physical layer is working but the data link layer is not. The most likely cause of this is that the cable is unplugged.
NEW QUESTION # 72
Which two protocols should be configured for the Cisco Unity Connection and Cisco UCM integration? (Choose two.)
- A. SCCP
- B. SIP
- C. H.323
- D. MGCP
- E. RTP
Answer: A,B
Explanation:
Section: Protocols, Codecs, and Endpoints
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/design/guide/b_11xcucdg/ b_11xcucdg_chapter_00.html#ID-2342-00000133
NEW QUESTION # 73
Which external DNS SRV record must be present for Mobile and Remote Access?
- A. _cisco-uds._tcp.example.com
- B. _collab-edge._tls.example.com
- C. _collab-edge._tcp.example.com
- D. _cisco-uds._tls example.com
Answer: B
NEW QUESTION # 74
An engineer is notified that the Cisco TelePresence MX800 that is registered in Cisco Unified Communications Manager shows an empty panel, and the Touch 10 shows a corresponding icon with no action when pressed.
Where does the engineer go to remove the inactive custom panel?
- A. The phone configuration page in CUCM Administration
- B. The In-Room Control Editor on the webpage of the MX800
- C. The SIP Trunk Security Profile page in CUCM Administration
- D. The Software Upgrades page in CUCM OS Administration
Answer: D
NEW QUESTION # 75
Which two steps should be taken to provision a phone after the Self-Provisioning feature was configured for end users? (Choose two.)
- A. Enter settings menu on the phone and press * ,*,# (star, star, pound).
- B. Ask the Cisco UCM administrator to associate the phone to an end user.
- C. Dial the self-provisioning IVR extension and associate the phone to an end user.
- D. Dial the hunt pilot extension and associate the phone to an end user
- E. Plug the phone into the network.
Answer: C,E
NEW QUESTION # 76
Refer to the Exhibit.
Which command is required to allow this media resource to handle Video Media streams?
- A. maximum sessions hardware 50
- B. video codec h264
- C. associate application Cisco unified border element
- D. codec pass-through
Answer: D
NEW QUESTION # 77
Refer to the exhibit. Which codec should an engineer select for a call made between "Dallas-REG" & "Austin-REG"?
- A. G.711
- B. G.729
- C. OPUS
- D. MP4A-LATM
Answer: B
NEW QUESTION # 78
......
View All 350-801 Actual Free Exam Questions Updated: https://lead2pass.troytecdumps.com/350-801-troytec-exam-dumps.html